Tips to Remove Sewage Backup After Heavy Rains
Tips To Safely Remove Sewage Backup After Heavy Rains to your Property.
Sewer backup in Plano, TX following heavy rains is not uncommon.
This can result in just a few inches of standing water or several feet of rain water accumulating.
Knowing how to remove this water safely and properly is important.
You might also consider putting preventative measures in place to reduce the risk of this situation in the future.
Taking Preventative Measures
If you have experienced a sewer backup once, you know it is definitely something that you do not want to happen again. There are a few ways to reduce your risk:
• Install backwater valves on any basement plumbing fixtures
• On the house trap, ensure that all sewer trap plugs fit properly and tightly
Removing Sewage Backup
First and foremost, you want to shut off the electricity and gas in the space that was affected by the backup. Then, the most important part is to get all of the standing water out as quickly as possible. A sump or trash pump might be beneficial for this step in the process. Once removed, start by opening windows and doors and running fans to air out the space. Do not walk around with no shoes on your feet.
Any items touched by the backup or black water should be thrown away due to the risk of them being contaminated. Then, start cleaning. Use appropriate cleaning solutions, such as bleach and other disinfectants. Go over all surfaces multiple times, using clean sponges or cloths so that you can avoid cross-contaminating cleaned areas. Once clean, make sure to use another fresh towel to thoroughly dry the area. As you are doing this, be careful not to track sewage or other debris to already-cleaned areas.
It is important that sewer backup is promptly removed to avoid additional problems. Once it is gone and restoration is completed, consider instituting preventative measures to help to decrease the chances of your home experiencing this issue in the future.
Call SERVPRO of Plano (972)-403-9004